海运的博客

N1盒子armbian编译内核开启iptables透明代理重定向REDIRECT模块

发布时间:November 17, 2018 // 分类:N1 // 2 Comments

armbian默认内核开启REDIRECT涉及的选项较多,不能使用仅编译内核模块方式,可编译内核并替换。

首先开启Netfilter nf_tables support,然后选择nf_tables redirect support,路径见图片顶部。

2018-11-17_154225.png

开启ipv4 nf_tables support、ipv4 redirect support for nf_tables、redirect target support:

2018-11-17_153925.png

开启ipv6 nf_tables support和ipv6 redirect support for nf_tables:

2018-11-17_154122.png

标签:none

有 2 条 关于" N1盒子armbian编译内核开启iptables透明代理重定向REDIRECT模块 "的评论

  1. zhu tie

    本人小白
    我想在n1上装wireguard,安装后错误信息如下:
    wg-quick up wg0
    [#] ip link add wg0 type wireguard
    RTNETLINK answers: Operation not supported
    Unable to access interface: Protocol not supported
    [#] ip link delete dev wg0
    Cannot find device "wg0"
    请问需要重新编译内核吗?

    1. 海运

      抱歉,没用过wireguard,不了解具体情况。
      看错误提示是创建虚拟网卡的类型wireguard不支持,需要内核模块或其它依赖?

评论已关闭

分类
最新文章
最近回复
  • 海运: 恩山有很多。
  • swsend: 大佬可以分享一下固件吗,谢谢。
  • Jimmy: 方法一 nghtp3步骤需要改成如下才能编译成功: git clone https://git...
  • 海运: 地址格式和udpxy一样,udpxy和msd_lite能用这个就能用。
  • 1: 怎么用 编译后的程序在家里路由器内任意一台设备上运行就可以吗?比如笔记本电脑 m参数是笔记本的...
  • 孤狼: ups_status_set: seems that UPS [BK650M2-CH] is ...
  • 孤狼: 擦。。。。apcupsd会失联 nut在冲到到100的时候会ONBATT进入关机状态,我想想办...
  • 海运: 网络,找到相应的url编辑重发请求,firefox有此功能,其它未知。
  • knetxp: 用浏览器F12网络拦截或监听后编辑重发请求,修改url中的set为set_super,将POS...
  • Albert: 啊啊啊啊啊啊啊啊啊 我太激动了,终于好了英文区搜索了半天,翻遍了 pve 论坛没找到好方法,博...