海运的博客

GT701-WG刷OpenWRT系统

发布时间:August 11, 2012 // 分类:OpenWrt // No Comments

GT701-WG配置如下 ,玩玩OpenWRT带几台电脑绰绰有余。

CPU:160MHZ
RAM:16M
FLASH:4M

GT701-WG最新可用Openwrt官方固件下载:http://downloads.openwrt.org/backfire/10.03.1/ar7/openwrt-ar7-squashfs.bin
刷机步骤,开机3秒左右连接到路由FTP:

ftp 192.168.0.1
Connected to 192.168.0.1.
220 ADAM2 FTP Server ready.
Name (192.168.0.1:peter): adam2
331 Password required for adam2.
Password: adam2
230 User adam2 successfully logged in.
Remote system type is UNIX.
ftp> binary
200 Type set to I.
ftp> quote SETENV MAC_PORT,0
200 SETENV command successful
ftp> quote SETENV mtd5,0x90010000,0x903e0000
200 SETENV command successful
ftp> quote MEDIA FLSH
200 Media set to FLSH.
ftp> put "openwrt-ar7-squashfs.bin" "openwrt-ar7-squashfs.bin mtd5"
local: openwrt-ar7-squashfs.bin remote: openwrt-ar7-squashfs.bin mtd5
200 Port command successful.
150 Opening BINARY mode data connection for file transfer.
100% |************************************| 2560 KiB 129.35 KiB/s 00:00 ETA
226 Transfer complete.
2621444 bytes sent in 00:20 (122.30 KiB/s)
ftp> quote REBOOT
221-Thank you for using the FTP service on ADAM2.
221 Goodbye.
ftp> quit

网络配置:

config atm-bridge
    option unit     0
    option encaps   llc
    option vpi      0
    option vci      35
    option payload  bridged
config interface wan
    option ifname       nas0
    option proto        pppoe
    option username    "username"
    option password    "password"

刷新为原版系统,提供GT701-WG官方5.5中文固件下载

ftp 192.168.0.1
Connected to 192.168.0.1.
220 ADAM2 FTP Server ready.
Name (192.168.0.1:user): adam2
Password:
230 User adam2 successfully logged in.
Remote system type is UNIX.
ftp> binary
200 Type set to I.
ftp> quote UNSETENV mtd5
200 UNSETENV command successful
ftp> quote UNSETENV MAC_PORT
200 UNSETENV command successful
ftp> quote MEDIA FLSH
200 Media set to FLSH.
ftp> put nsp.ar7wrd.squashfs.img "nsp.ar7wrd.squashfs.img mtd0"
local: nsp.ar7wrd.squashfs.img remote: nsp.ar7wrd.squashfs.img mtd0
502 Command not implemented - Try HELP.
227 Entering Passive Mode (192,168,0,1,4,45).
150 Opening BINARY mode data connection for file transfer.
100% |*************************************|  1940 KB   82.54 KB/s    00:00 ETA
226 Transfer complete.
1986560 bytes sent in 00:23 (81.18 KB/s)
ftp> put ram_zimage_pad.ar7wrd.nsp.squashfs.bin "ram_zimage_pad.ar7wrd.nsp.squashfs.bin mtd1"
local: ram_zimage_pad.ar7wrd.nsp.squashfs.bin remote: ram_zimage_pad.ar7wrd.nsp.squashfs.bin mtd1
227 Entering Passive Mode (192,168,0,1,4,45).
150 Opening BINARY mode data connection for file transfer.
100% |*************************************|   640 KB   85.43 KB/s    00:00 ETA
226 Transfer complete.
655360 bytes sent in 00:07 (81.14 KB/s)
ftp> quote REBOOT
221-Thank you for using the FTP service on ADAM2.
221 Goodbye.
ftp> quit
分类
最新文章
最近回复
  • chainofhonor: 感谢,用dnsmasq设置自动判断BIOS和UEFI成功了
  • 海运: 不好意思,这个是很多年前的,现在也许已经不适用,我现在也不用多线了。
  • CQ: -m state --state NEW 替换成-m conntrack --ctstate NEW
  • CQ: 你好,我入站已经成功分流,但是不知道出站怎么设置,PREROUTING替换成POSTROUTI...
  • K: 好的,谢谢,我去试试!
  • 海运: 可以试试3proxy
  • daha: PHP的怎么使用???
  • 海运: 换回了5.3内核,5.8用5.3 dtb虽然能开机且负载正常,但也有其它问题,不建议使用。
  • shangyatsen: 后面的内核高精度计时器的问题使用5.4或者5.3的dtb会正常吗?我也发现有这个日志出现。感觉...
  • 海运: 缺少相应模块?