海运的博客

OpenWRT交叉编译非官方软件sshpass

发布时间:October 30, 2013 // 分类:OpenWrt // No Comments

安装编译环境:

apt-get install build-essential libncurses5-dev zlib1g-dev

下载交叉编译环境及sshpass源码:

wget http://downloads.openwrt.org/backfire/10.03.1/brcm63xx/OpenWrt-SDK-brcm63xx-for-Linux-i686-gcc-4.3.3%2bcs_uClibc-0.9.30.1.tar.bz2
tar jxvf OpenWrt-SDK-brcm63xx-for-Linux-i686-gcc-4.3.3+cs_uClibc-0.9.30.1.tar.bz2 
mkdir -p OpenWrt-SDK-brcm63xx-for-Linux-i686-gcc-4.3.3+cs_uClibc-0.9.30.1/package/sshpass
cd OpenWrt-SDK-brcm63xx-for-Linux-i686-gcc-4.3.3+cs_uClibc-0.9.30.1/package/sshpass
wget http://sourceforge.net/projects/sshpass/files/sshpass/1.05/sshpass-1.05.tar.gz
tar zxvf sshpass-1.05.tar.gz
mv sshpass-1.05 src

sshpass目录新建Makefile文件:

include $(TOPDIR)/rules.mk

# Name and release number of this package
PKG_NAME:=sshpass
PKG_RELEASE:=1.05

PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)

include $(INCLUDE_DIR)/package.mk

define Package/sshpass
    SECTION:=utils
    CATEGORY:=Utilities
    TITLE:=sshpass
endef

define Package/sshpass/description
    Sshpass is a tool for non-interactivly performing password authentication with SSH's
endef

# Specify what needs to be done to prepare for building the package.
define Build/Prepare
    mkdir -p $(PKG_BUILD_DIR)
    $(CP) ./src/* $(PKG_BUILD_DIR)/
endef


# Specify where and how to install the program.
define Package/sshpass/install
    $(INSTALL_DIR) $(1)/bin
    $(INSTALL_BIN) $(PKG_BUILD_DIR)/sshpass $(1)/bin/
endef

# This line executes the necessary commands to compile our program.
$(eval $(call BuildPackage,sshpass))

编译sshpass:

cd ../
make package/sshpass/compile

编译成功的程序文件:

ls bin/brcm63xx/packages/
Packages  Packages.gz  sshpass_1.05_brcm63xx.ipk

编译过程中如遇到以下错误:

staging_dir/toolchain-mips_r2_gcc-4.3.3+cs_uClibc-0.9.30.1/usr/lib/libc.so: undefined reference to `_dl_app_init_array’

需修改:

TARGET_LDFLAGS:=-L$(STAGING_DIR)/usr/lib -L$(STAGING_DIR)/lib

为:

TARGET_LDFLAGS+= -L$(TOOLCHAIN_DIR)/usr/lib -L$(TOOLCHAIN_DIR)/lib -Wl,-rpath=$(TOOLCHAIN_DIR)/lib

标签:openwrt

评论已关闭

分类
最新文章
最近回复
  • 海运: 正常情况下编译整个内核执行make menuconfig后就不会出现此提示,当单独编译单个模块...
  • oijq: 就是用的armbian的配置文件哈,按你的教程做的,在执行make LOCALVERSION=...
  • 海运: 使用armbian的配置文件,其它添加或修改自己懂的部分,不懂的就不要碰了。
  • oijq: 编译时这些选项全部选Y吗?Actions Semi Platforms (ARCH_ACTIO...
  • 海运: n1编译bbr内核模块参考这个:https://www.haiyun.me/archives/...
  • jiqz: make M=net/ipv4/ CONFIG_TCP_CONG_BBR=m modules编...
  • ruralhunter: 哦,文档里应该是对的,是.config
  • ruralhunter: cp /mnt/boot/config-4.18.7-aml-s9xxx .config这里应...
  • 海运: 你是编译不成功呢?还是编译后不能运行呢?还是运行后不能访问web界面呢?
  • 白墨: 可能不清楚就是编译安装后启动后访问不了web界面