海运的博客

Linux/Openwrt路由安装配置UPNP服务提高迅雷下载速度

发布时间:September 7, 2012 // 分类:OpenWrt // 1 Comment

路由器下电脑为实现互联网端到端的连接需要配置DNAT(端口映射),UPNP就相当于自动化DNAT的实现,路由和客户端软件都需支持UPNP。
Openwrt路由下安装UPNP服务:

#http://www.haiyun.me
opkg update
opkg install miniupnpd

配置Iptables UPNP链,用于发现UPNP后在此链自动添加端口映射。

#允许特定转发
iptables -N MINIUPNPD
iptables -I FORWARD -i pppoe-wan -o br-lan -j MINIUPNPD
#DNAT端口映射
iptables -t nat -N MINIUPNPD
iptables -t nat -I PREROUTING -i pppoe-wan -j MINIUPNPD

UPNP配置文件:

cat /var/etc/miniupnpd.conf 
#http://www.haiyun.me
ext_ifname=pppoe-wan
listening_ip=192.168.1.1
port=5000
enable_natpmp=yes
enable_upnp=yes
secure_mode=yes
system_uptime=yes
bitrate_down=28672000
bitrate_up=2867200
uuid=a107991c-8b19-4ce4-a525-36bd2c814165
allow 1024-65535 0.0.0.0/0 1024-65535
deny 0-65535 0.0.0.0/0 0-65535

开启UPNP服务:

/etc/init.d/miniupnpd enable
/etc/init.d/miniupnpd start

使用迅雷开启UPNP测试,查看日志UPNP服务已为迅雷添加端口映射:

Sep  7 19:06:01 OpenWrt daemon.info miniupnpd[7232]: HTTP connection from 192.168.1.16:45067
Sep  7 19:06:01 OpenWrt daemon.info miniupnpd[7232]: HTTP REQUEST : POST /ctl/IPConn (HTTP/1.1)
Sep  7 19:06:01 OpenWrt daemon.info miniupnpd[7232]: SOAPAction: urn:schemas-upnp-org:service:WANIPConnection:1#AddPortMapping
Sep  7 19:06:01 OpenWrt daemon.info miniupnpd[7232]: AddPortMapping: ext port 65379 to 192.168.1.16:65379 protocol TCP for: Thunder5
Sep  7 19:06:01 OpenWrt daemon.debug miniupnpd[7232]: UPnP permission rule 0 matched : port mapping accepted
Sep  7 19:06:01 OpenWrt daemon.info miniupnpd[7232]: redirecting port 65379 to 192.168.1.16:65379 protocol TCP for: Thunder5
Sep  7 19:06:01 OpenWrt daemon.info miniupnpd[7232]: HTTP connection from 192.168.1.16:45068
Sep  7 19:06:01 OpenWrt daemon.info miniupnpd[7232]: HTTP REQUEST : POST /ctl/IPConn (HTTP/1.1)
Sep  7 19:06:01 OpenWrt daemon.info miniupnpd[7232]: SOAPAction: urn:schemas-upnp-org:service:WANIPConnection:1#AddPortMapping
Sep  7 19:06:01 OpenWrt daemon.info miniupnpd[7232]: AddPortMapping: ext port 65379 to 192.168.1.16:15301 protocol UDP for: Thunder5
Sep  7 19:06:01 OpenWrt daemon.debug miniupnpd[7232]: UPnP permission rule 0 matched : port mapping accepted
Sep  7 19:06:01 OpenWrt daemon.info miniupnpd[7232]: redirecting port 65379 to 192.168.1.16:15301 protocol UDP for: Thunder5

查看Iptables链UPNP添加的规则:

iptables -L MINIUPNPD -nv
Chain MINIUPNPD (1 references)
 pkts bytes target     prot opt in     out     source               destination         
26245   18M ACCEPT     tcp  --  *      *       0.0.0.0/0            192.168.1.16        tcp dpt:65379 
18182 4423K ACCEPT     udp  --  *      *       0.0.0.0/0            192.168.1.16        udp dpt:15301 
iptables -t nat -L MINIUPNPD -nv
Chain MINIUPNPD (1 references)
 pkts bytes target     prot opt in     out     source               destination         
  676 61598 DNAT       tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp dpt:65379 to:192.168.1.16:65379 
  316 22320 DNAT       udp  --  *      *       0.0.0.0/0            0.0.0.0/0           udp dpt:65379 to:192.168.1.16:15301 

标签:openwrt, 迅雷, p2p, 迅雷开启upnp, openwrt安装配置upnp, openwrt路由开启upnp, upnp

有一条 关于" Linux/Openwrt路由安装配置UPNP服务提高迅雷下载速度 "的评论

  1. wang wang

    openwrt 只有 tmp/etc/miniupnpd.conf 修改后又重置了,其他路径找不到 .conf 文件,还有我的配置文件是ext_ifname=eth0.2
    listening_ip=brlan ,iptables 怎么写,log文件在哪个路径?

评论已关闭

分类
最新文章
最近回复
  • 海运: 正常情况下编译整个内核执行make menuconfig后就不会出现此提示,当单独编译单个模块...
  • oijq: 就是用的armbian的配置文件哈,按你的教程做的,在执行make LOCALVERSION=...
  • 海运: 使用armbian的配置文件,其它添加或修改自己懂的部分,不懂的就不要碰了。
  • oijq: 编译时这些选项全部选Y吗?Actions Semi Platforms (ARCH_ACTIO...
  • 海运: n1编译bbr内核模块参考这个:https://www.haiyun.me/archives/...
  • jiqz: make M=net/ipv4/ CONFIG_TCP_CONG_BBR=m modules编...
  • ruralhunter: 哦,文档里应该是对的,是.config
  • ruralhunter: cp /mnt/boot/config-4.18.7-aml-s9xxx .config这里应...
  • 海运: 你是编译不成功呢?还是编译后不能运行呢?还是运行后不能访问web界面呢?
  • 白墨: 可能不清楚就是编译安装后启动后访问不了web界面