海运的博客

Nagios配置pnp4nagios支持图表显示

发布时间:June 3, 2012 // 分类:Nagios // No Comments

Nagios配合pnp4nagios可实现类似Cacti的图表显示,便于管理和分析服务器运行状况。
Nagios安装请参考:http://www.haiyun.me/archives/centos-install-nagios.html
安装rrdtool,需安装epel源

#http://www.haiyun.me
yum install rrdtools perl-rrdtool perl-Time-HiRes

安装php4nagios:

wget http://nchc.dl.sourceforge.net/project/pnp4nagios/PNP-0.6/pnp4nagios-0.6.17.tar.gz
tar zxvf pnp4nagios-0.6.17.tar.gz 
cd pnp4nagios-0.6.17
./configure --with-nagios-user=nagios --with-nagios-group=nagios
make all
make install
make install-webconf
make install-config
make install-init
#make fullinstall #相当于上面3个指令

配置php4nagios:

#http://www.haiyun.me
cd /usr/local/pnp4nagios/etc/
mv misccommands.cfg-sample misccommands.cfg
mv rra.cfg-sample rra.cfg
mv nagios.cfg-sample nagios.cfg
cd pages/
mv web_traffic.cfg-sample web_traffic.cfg
cd ../check_commands/
mv check_all_local_disks.cfg-sample check_all_local_disks.cfg
mv check_nrpe.cfg-sample check_nrpe.cfg
mv check_nwstat.cfg-sample check_nwstat.cfg
/etc/init.d/npcd start
chkconfig npcd on

配置Nagios数据输出接口:

vim /usr/local/nagios/etc/nagios.cfg 
process_performance_data=1 #默认为0,修改为1
host_perfdata_command=process-host-perfdata #注释开头#号
service_perfdata_command=process-service-perfdata #注释开头#号

替换commands.cfg命令process-service-perfdata为以下内容:

vim /usr/local/nagios/etc/objects/commands.cfg 
# 'process-host-perfdata' command definition
define command{
        command_name    process-host-perfdata
        command_line    /usr/local/pnp4nagios/libexec/process_perfdata.pl -d HOSTPERFDATA 
        }
# 'process-service-perfdata' command definition
define command{
        command_name    process-service-perfdata
        command_line    /usr/local/pnp4nagios/libexec/process_perfdata.pl
        }                              

在模板配置文件中添加图表图标模板:

#http://www.haiyun.me
 vim /usr/local/nagios/etc/objects/templates.cfg 
define host {
name          host-pnp
action_url    /pnp4nagios/index.php/graph?host=$HOSTNAME$&srv=_HOST_' class='tips' rel='/pnp4nagios/index.php/popup?host=$HOSTNAME$&srv=_HOST_
register   0
}
define service {
name         service-pnp
action_url   /pnp4nagios/index.php/graph?host=$HOSTNAME$&srv=$SERVICEDESC$' class='tips' rel='/pnp4nagios/index.php/popup?host=$HOSTNAME$&srv=$SERVICEDESC$
register   0
}

复制鼠标悬停图标显示文件:

cp /usr/local/pnp4nagios/contrib/ssi/* /usr/local/nagios/share/ssi/ 

在监控主机或服务中调用图表模板:

define host{
        use                     linux-server,host-pnp                             
        host_name               localhost
        alias                   localhost
        address                 127.0.0.1
        }
define service{
        use                             local-service,service-pnp
        host_name                       localhost
        service_description             PING
    check_command            check_ping!100.0,20%!500.0,60%
        }
define service{
        use                             local-service,service-pnp
        host_name                       localhost
        service_description             Root Partition
    check_command            check_local_disk!20%!10%!/
        }

重启nagios,访问nagios界面即可看到图表小图标:
nagios图表图标.png
点击图标会显示pnp4nagios测试页面:
pnp4nagios测试页面.png
全是绿色代表配置正常,然后移除或修改install.php文件:

rm -rf /usr/local/pnp4nagios/share/install.php

再次点击图标就会显示当前监控服务由pnp4nagios生成的图表了:
nagios图表pnp4nagios.png

标签:服务器监控, nagios, pnp4nagios, nagios添加pnp4nagios生成图表

评论已关闭

分类
最新文章
最近回复
  • 海运: 正常情况下编译整个内核执行make menuconfig后就不会出现此提示,当单独编译单个模块...
  • oijq: 就是用的armbian的配置文件哈,按你的教程做的,在执行make LOCALVERSION=...
  • 海运: 使用armbian的配置文件,其它添加或修改自己懂的部分,不懂的就不要碰了。
  • oijq: 编译时这些选项全部选Y吗?Actions Semi Platforms (ARCH_ACTIO...
  • 海运: n1编译bbr内核模块参考这个:https://www.haiyun.me/archives/...
  • jiqz: make M=net/ipv4/ CONFIG_TCP_CONG_BBR=m modules编...
  • ruralhunter: 哦,文档里应该是对的,是.config
  • ruralhunter: cp /mnt/boot/config-4.18.7-aml-s9xxx .config这里应...
  • 海运: 你是编译不成功呢?还是编译后不能运行呢?还是运行后不能访问web界面呢?
  • 白墨: 可能不清楚就是编译安装后启动后访问不了web界面